T051023.02MSS Inverter-- Manufacturer by MoniServ for 6 CCFL Lamps
TFT Module.
TFT Module.
Symptom: No Display ( No Picture) on screen but Power Indicate light stays on green. Or
Screen Flickering. If all LED lights lit up in screen and you can not turn the monitor on/off.
Then the problem is on Main Board ( AD Board). More details at the bottom of this page.
T051023.02MSS, it is an exact substitution inverter for 20" Dell 2000FP which original
manufacture by AMBIT (AMBIT T051023.02). By analysis the failure of AMBIT T051023.02
Backlight Inverter board, Our engineers had come up with a better circuit design which is a lot
more dependable.
Part Number on Board:
AMBIT REV:4
T051023.02MSS
Caution!!
Dell 2000FP used two different Type of Inverter board, we suggest that you double check
your inverter board's part number before place an order. The details as follow:
T051023.00 with two of CCFL Output Connector is 14mm width
T051023.02 with two of CCFL Output Connector is 22mm width
Screen Flickering. If all LED lights lit up in screen and you can not turn the monitor on/off.
Then the problem is on Main Board ( AD Board). More details at the bottom of this page.
T051023.02MSS, it is an exact substitution inverter for 20" Dell 2000FP which original
manufacture by AMBIT (AMBIT T051023.02). By analysis the failure of AMBIT T051023.02
Backlight Inverter board, Our engineers had come up with a better circuit design which is a lot
more dependable.
Part Number on Board:
AMBIT REV:4
T051023.02MSS
Caution!!
Dell 2000FP used two different Type of Inverter board, we suggest that you double check
your inverter board's part number before place an order. The details as follow:
T051023.00 with two of CCFL Output Connector is 14mm width
T051023.02 with two of CCFL Output Connector is 22mm width
This Inverter works on the following models:
|
Main Board Problem:
Symptom: All LED Light lit up in solid screen ( Shown on photo below) and you can not turn
the monitor Off, there is no picture on screen. This is causing by defective main board, NOT
Backlight Inverter board.
Symptom: All LED Light lit up in solid screen ( Shown on photo below) and you can not turn
the monitor Off, there is no picture on screen. This is causing by defective main board, NOT
Backlight Inverter board.
 |  |  |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |