Backlight Inverter Removing and Installation Guide
Is it easy to replace Backlight Inverter?
Installing the Backlight inverter is easy, it does not require any technical skills. In fact, it is a
lot easier then changing the I/O Card in your PC System because there is no driver (
Software) Involve.
Installing the Backlight inverter is easy, it does not require any technical skills. In fact, it is a
lot easier then changing the I/O Card in your PC System because there is no driver (
Software) Involve.
Tools:
Philips screw driver
Small Flat screwdriver
That all!
Philips screw driver
Small Flat screwdriver
That all!
Preparation:
Make sure your desk is clean and you also need a piece of soft clothes because you need to
place your LCD Monitor face down
Make sure your desk is clean and you also need a piece of soft clothes because you need to
place your LCD Monitor face down
How to open the back cover:
First, remove all screws on the back cover, then, use a small flat head screw driver to push
down the plastic Clip inside the LCD Monitor star at the bottom of monitor. Then you can
easily separate the front bezel and back cover like the photos shown below.
First, remove all screws on the back cover, then, use a small flat head screw driver to push
down the plastic Clip inside the LCD Monitor star at the bottom of monitor. Then you can
easily separate the front bezel and back cover like the photos shown below.
 |  |  |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
|