A61L-0001-0168-LCD is a direct replacement for Fanuc A61L-0001-0168. A61L-0001-0168-LCD has a much better image quality and is much brighter than old A61L-0001-0168. Wider viewing angle and faster response time then old A61L-0001-0168. A61L-0001-0168-LCD has upgraded our Sunlight Readable LED Kit and A61L-0001-0168-LCD will last 10X longer than CCFL lamps.
It is easy to Install! Anyone can do it! Connect +12V or 24V DC to Red wire and connect negative (GND) to Black wire! 1 year warranty!
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from main board
Disconnect Screen wire harness on A61L-0001-0168
Remove old A61L-0001-0168
Mount A61L-0001-0168-LCD back to the same location*
Connect Screen wire harness to A61L-0001-0168-LCD
Connect Ground (GND) to Black wire
A61L-0001-0168-LCD has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
A61L-0001-0168-LCD included the following items:
New 10.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
6 pin pigtail connector with Red and Black wires
*Note: You may have to modify the bolt hole on brackets to mount the LCD in the center. If you are using the same bolt hole, you may see a little bit metal frame on left side