A02B-0222-C150-LCD is a direct replacement for A02B-0222-C150. A02B-0222-C150-LCD has a much better image quality and is much brighter than old A02B-0222-C150. Wider viewing angle and faster response time then old A02B-0222-C150. It has upgraded our Sunlight Readable LED Kit and A02B-0222-C150-LCD will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 1 year warranty!
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from main board
Disconnect Screen wire harness on A02B-0222-C150
Remove old A02B-0222-C150
Mount A02B-0222-C150-LCD back to the same location*
Connect Screen wire harness to A02B-0222-C150-LCD
Connect Ground (GND) to Black wire
A02B-0222-C150-LCD has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
A02B-0222-C150-LCD included the following items:
New 8.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
6 pin pigtail connector with Red and Black wires
*Note: You may have to modify the bolt hole on brackets to mount the LCD in the center. If you are using the same bolt hole, you may see a little bit metal frame on left side