A61L-0001-0139-LCD is a direct replacement for Fanuc A61L-0001-0139. A61L-0001-0139-LCD has the same interface connector, dimension and screw hole as the old A61L-0001-0139. A61L-0001-0139-LCD has a much better image quality and is much brighter than old A61L-0001-0139. Wider viewing angle and faster response time then old A61L-0001-0139. A61L-0001-0139-LCD has upgraded our Sunlight Readable LED Kit and A61L-0001-0139-LCD will last 10X longer than CCFL lamps.
It is easy to Install! Anyone can do it! Connect +12V or 24V DC to Red wire and connect negative (GND) to Black wire! 1 year warranty.
Installation takes about 15 minutes.
Disconnect CCFL lamp wire harness from main board
Disconnect Screen wire harness on A61L-0001-0139
Remove old A61L-0001-0139
Mount A61L-0001-0139-LCD back to the same location*
Connect Screen wire harness to A61L-0001-0139-LCD
Connect Ground (GND) to Black wire
A61L-0001-0139-LCD included the following items:
1) New 8.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
1) MS610UB LED driver
1) A wire connector with Red and Black wires
1) 4 screws and 4 spacers
In case there is a height issue between Replacement LCD and Metal chassis. Please use the enclosed spacers and screws