DMF50260NFU-FW-7-LCD is a direct replacement for OPTREX DMF50260NFU-FW-7. DMF50260NFU-FW-7-LCD has a much better image quality and is much brighter than old DMF50260NFU-FW-7. Wider viewing angle and faster response time then old OPTREX DMF50260NFU-FW-7. It has upgraded our Sunlight Readable LED Kit and DMF50260NFU-FW-7-LCD will last 10X longer than CCFL lamps. It is easy to install! Anyone can do it! 1 year warranty! We ship worldwide.
Installation takes about 15 minutes:
Disconnect CCFL lamp wire harness from inverter board.
Disconnect Screen wire harness on DMF50260NFU-FW-7
Remove old DMF50260NFU-FW-7
Mount DMF50260NFU-FW-7-LCD back to the same location*
Connect Screen wire harness to DMF50260NFU-FW-7-LCD
Connect +12V or 24V DC to Red wire
Connect Ground (GND) to Black wire
DMF50260NFU-FW-7-LCD has the same interface connector, dimension and screw hole as the LCD screens that are listed below.
DMF50260NFU-FW-7-LCD included the following items:
9.4 inch LCD screen ( it has upgraded to Sunlight Readable LED kit)
MS610UB LED driver
6 pin pigtail connector with Red and Black wires